Feature

Waterproof Tri-chip 4LEDs Module adpots 4 pcs of Tri-chip LED as its luminous body, this product is of good ability, wide beaming angle, and perfect design. ABS Engineering Plastic Housing glued with epoxy makes the product wholly waterproof ( IP 65).

Unique and elegant design, wide beam angle ensures enough scope of light emitting.

It adopts international famous Chip to make the LED bright enough and reliable.

This product can be widely used for signs, logos, cove lighting, channel letter, etc.

1.4pcs tri-chip SMD LEDs are adopted, high brightness and light efficiency. These LEDs are set closely on the board which make the module could achieve high intensity. No spot; No shadow.

2. Professionally designed to be IP65 protection rate.

3. Easy installation with two mounting holes and 3M adhesive tape on the back.

4. Available Color: Red, Yellow, Blue, Green, White.

5. Application: Backlight of signage, channel letter, signs, light box etc.

6. Package Info: Ctn size: 58*27*36cm, 1000pcs/ctn, Gross Weight: 13KG/ctn.

7. Attention: Please do not install it in totally exposed outdoor environment.

8. Warranty: 18 months.

Art No.	Descripiton	Size (mm)	Voltage	Current (mA)	Power	LED qty	Lumen	Beaming Angle	IP Rate
5050-SMD-4R-1	Waterproof 5050 SMD 4LEDs Module Red	46*32*5.9	12VDC	60mA	0.72W	4	18lm	120°	IP65
5050-SMD-4Y-1	Waterproof 5050 SMD 4LEDs Module Yellow	46*32*5.9	12VDC	60mA	0.72W	4	18lm	120°	IP65
5050-SMD-4B-1	Waterproof 5050 SMD 4LEDs Module Blue	46*32*5.9	12VDC	60mA	0.72W	4	18lm	120°	IP65
5050-SMD-4G-1	Waterproof 5050 SMD 4LEDs Module Green	46*32*5.9	12VDC	60mA	0.72W	4	18lm	120°	IP65
5050-SMD-4W-1	Waterproof 5050 SMD 4LEDs Module White	46*32*5.9	12VDC	60mA	0.72W	4	18lm	120°	IP65
5050-SMD-4WW-1	Waterproof 3528 SMD 4LEDs Module Warm white	46*32*5.9	12VDC	60mA	0.72W	4	18lm	120°	IP65

 Specification

Size: 46*32*5.9mm

IP Class: IP65

Beaming Angle: 120

Weight: 10g

Electrical specification

Input Voltage: 12VDC

Power Consumption: 0.72W

 Attention:  

* To ensure the longevity and stability of Module, please do not hit or beat the module forcibly.

* Please do not install it in totally exposed outdoor environment.

* We advise that the distance between the nodule and light bos cover within 80~150mm, The distance between each module is 40~60mm. 

Warning:

* Do not touch INPUT PORT when power is on.

* Please leave 20%power free to protect the brightness of module from being influenced by environments.

* Install this module at desired installation spot.

* Please note the negavive and positive polarity when you link wires of power supply to avoid short circuit.
* Make sure the output voltage of power supply is of the same with module’s operating voltage.