Feature:
Waterproof Tri-chip 2LEDs Module adpots 2pcs of Tri-chip LED as its luminous body, this product has good ability, wide beaming angle, and perfect design. ABS Engineering Plastic Housing glued with epoxy makes the product wholly waterproof ( IP 65).
Easy installation can be realized with two mounting holes and 3M tape on the back. This product can be widely used for signs, logos, cove lighting, channel letter, etc
1. Light source: 2pcs 5050 tri-chip LEDs adopted, high light output with lower power consumption.
2. Energy saving, environment-friendly, no spot; no shadow.
3. Easy installation with two mounting holes and 3M adhesive tape on the back.
4. Slim body design make it can be installed into small channel letter conveniently.
5. Application: Backlight of signage, channel letter, signs, light box etc.
6. Package Info: Ctn size: 58*27*36cm, 1000pcs/ctn, Gross Weight: 12KG/ctn
7. Attention: Please do not install it in totally exposed outdoor environment.
8. Warranty: 18 months
Art No. | Descripiton | Size
(mm) | Voltage | Current
(mA) | Power | LED qty | Lumen | Beaming Angle | IP Rate | |
| |
5050-SMD-2R-1 | Waterproof 5050 SMD 2LEDs Module Red | 60.6*17*5.7 | 12VDC | 30mA | 0.36W | 2 | 3.9lm | 120° | IP65 | |
5050-SMD-2Y-1 | Waterproof 5050 SMD 2LEDs Module Yellow | 60.6*17*5.7 | 12VDC | 30mA | 0.36W | 2 | 6lm | 120° | IP65 | |
5050-SMD-2B-1 | Waterproof 5050 SMD 2LEDs Module Blue | 60.6*17*5.7 | 12VDC | 30mA | 0.36W | 2 | 3lm | 120° | IP65 | |
5050-SMD-2G-1 | Waterproof 5050 SMD 2LEDs Module Green | 60.6*17*5.7 | 12VDC | 30mA | 0.36W | 2 | 9lm | 120° | IP65 | |
5050-SMD-2W-1 | Waterproof 5050 SMD 2LEDs Module White | 60.6*17*5.7 | 12VDC | 30mA | 0.36W | 2 | 19.5lm | 120° | IP65 | |
5050-SMD-2WW-1 | Waterproof 5050 SMD 2LEDs Module Warm white | 60.6*17*5.7 | 12VDC | 30mA | 0.36W | 2 | 15lm | 120° | IP65 | |
Specification:
Size: 60.6*17*5.7mm
IP Class: IP65
Weight: 7g
Beaming Angle:120degree
Electrical specification:
Input Voltage: 12VDC
Power Consumption: 0.36W/pc
Attention:
* To ensure the longevity and stability of Module, please do not hit or beat the module forcibly.
* Please do not install it in totally exposed outdoor environment.
* We advise that the distance between the nodule and light bos cover within 80~150mm, The distance between each module is 40~60mm.
Warning:
* Do not touch INPUT PORT when power is on.
* Please leave 20%power free to protect the brightness of module from being influenced by environments.
* Install this module at desired installation spot.
* Please note the negavive and positive polarity when you link wires of power supply to avoid short circuit.
* Make sure the output voltage of power supply is of the same with module’s operating voltage.
