Feature:

ABS Engineering Plastic Housing glued with epoxy makes the module wholly waterproof. This product can be widely used for signs, logos, cove lighting, channel letter, etc.

Waterproof SMD 2LEDs Module is of unique and elegant design---wide beam angle ensures its high brightness. It adopts international famous chip to make the LED bright enough and reliable.

1. Light Source: 2pcs SMD LEDs adopted, high brightness and light efficiency. No spot; No shadow.

2. Professionally designed to be IP65 protection rate.

3. Easy installation with two mounting holes and 3M tape adhesive tape on the back.

4. Slim body and special curve design make it can be installed inside small channel letter conveniently.

5. Available Color: Red, Yellow, Blue, Green, White.

6. Application: backlight of signage, channel letter, signs, light box etc.

7. Attention: Please do not install it in totally exposed outdoor environment.

8. Package Info: Ctn size: 58*27*36cm, 4000pcs/ctn, Gross Weight: 9KG/ctn, Volumetric Weight: 13KG/ctn.

9. Warranty: 18 months.

Art No.	Descripiton	Size (mm)	Voltage	Current (mA)	Power	LED qty	Lumen	Beaming Angle	IP Rate
M2R-SF1	Waterproof 3528 SMD Mini LED Module Red	23*9*4	12VDC	20mA	0.24W	2	2.6lm	120°	IP65
M2Y-SF1	Waterproof 3528 SMD Mini LED Module Yellow	23*9*4	12VDC	20mA	0.24W	2	2lm	120°	IP65
M2B-SF1	Waterproof 3528 SMD Mini LED Module Blue	23*9*4	12VDC	20mA	0.24W	2	4lm	120°	IP65
M2G-SF1	Waterproof 3528 SMD Mini LED Module Green	23*9*4	12VDC	20mA	0.24W	2	6lm	120°	IP65
M2W-SF1	Waterproof 3528 SMD Mini LED Module White	23*9*4	12VDC	30mA	0.36W	2	13lm	120°	IP65
M2WW-SF1	Waterproof 3528 SMD Mini LED Module Warm White	23*9*4	12VDC	20mA	0.24W	2	10lm	120°	IP65

Specification: 

Size: 23*9*4mm

IP Class: IP65

Weight: 1.5g

Beaming Angle: 120degree

Electrical specification:

Input Voltage: 12VDC

Attention:  

* To ensure the longevity and stability of Module, please do not hit or beat the module forcibly.

 * Please do not install it in totally exposed outdoor environment.

* We advise that the distance between the nodule and light bos cover within 80~150mm, The distance between each module is 40~60mm. 

Warning:

* Do not touch INPUT PORT when power is on.

* Please leave 20%power free to protect the brightness of module from being influenced by environments.

* Install this module at desired installation spot.

* Please note the negavive and positive polarity when you link wires of power supply to avoid short circuit.

* Make sure the output voltage of power supply is of the same with module’s operating voltage.