Feature:

1).This RGB LED Strip adopts a kind super flexible PCB board.

2).3-LEDs or 6-LEDs make one group and each group can be cut according to customers’ requirement.

    The ribbon is matched with wiring bridge in the middle of it, this design makes the ribbon can be easily

connected after cutting, it doesn’t need to be weld wire as usual.  

3). It could be connected with each other via male and female connector, and 3M tape on its back.

4). 12VDC and 24VDC available; Viewing angle is 120°, Waterproof IP67.

5). The luminous body is of very high intensity, large viewing angle, good quality and stability. 

6). Consumption Watt: 3.6W/0.5M (12VDC) or 5.76W/0.5M (24VDC), 11.7mm wide

7). LED spacing: 33mm (12V DC) or 20MM (24V DC).  

8). It can be droved by Remote Controller CT-308RF, also, it can be worked with DMX512 & DV512 controlling system

with many changing effects, such as multi-color jumping, gradual color changing and etc;

9). Many indoor applications, such as small floodlight, cove lighting, stair decoration and outline drawing, etc

10). Special waterproof material ensures the ribbon could work normally when temperature varies largely from -20° to +60°

11). 0.5meter/pc and 3meter/reel available.