Feature:
Waterproof Chip RGB 3LEDs Module adpots 3pcs of RGB LED as its luminous body which is of high intensity and large beaming angle. The chips of the LEDs are from famous international company.
This product has good ability, wide beaming angle, and perfect design. ABS Engineering Plastic Housing glued with epoxy makes the product achieve waterproof rate IP65.
It can be controlled by IMG-DMX 512 to realize the effects of multi-color jumping, gradual color changing, etc. It also can realize whole color changing when controlled by controller of common positive. This product can be widely used both indoor and outdoor, such as indoor decoration, small floodlight, signs, logos, cove lighting, edge decoration, etc
1. Light source: 3pcs tri-chip SMD LEDs adopted, high brightness and light efficiency.
2. Professionally designed to be IP 65 protection rate.
3. Easy installation with two mounting holes and 3M adhesive tape on the back.
4. When controlled by RGB controller which is common positive, it can realize many kinds of changing effects , such as multi-color jumping, gradual color changing and etc.
5. Application: Backlight of signage, channel letter, signs, light box etc.
6. Package Info: Ctn size: 58*27*36cm, 1000pcs/ctn, Gross Weight: 13KG/ctn.
7. Attention: Please do not install it in totally exposed outdoor environment.
8. Warranty: 18 months.
Art No. | Descripiton | Size
(mm) | Input Voltage | Current (mA) | Watts | Number of LED | Lumen (Lm) | Beaming Angle | IP Rate | |
| |
5050-SMD-3R-1 | Waterproof 3-LEDs RGB LED Module | 82*17*5.8 | 12VDC | 60mA | 0.72W | 3pcs | 30-40 | 120° | IP65 | |
Specification:
Size: 82*17*5.8mm
IP Class: IP65
Weight: 10g
Beaming Angle: >120degree
Electrical specification:
Input Voltage: 12VDC
Power Consumption: 0.72W/pc
Attention:
* To ensure the longevity and stability of waterproof chip RGB 3LEDs Module, please do not hit or beat the module forcibly.
* Please do not install it in totally exposed outdoor environment.
Warning:
* Do not touch INPUT PORT when power is on.
* Please leave 20%power free to protect the brightness of module from being influenced by environments.
* Install this module at desired installation spot.
* Please note the negavive and positive polarity when you link wires of power supply to avoid short circuit.
* Make sure the output voltage of power supply is of the same with module’s operating voltage.
