Feature

Waterproof Tri-chip 3LEDs Module adpots 3 pcs of Tri-chip LED as its luminous body, this product has good ability, wide beaming angle, and perfect design. ABS Engineering Plastic Housing glued with epoxy makes the product wholly waterproof ( IP 65).

Easy installation can be realized with two mounting holes and 3M tape on the back. This product can be widely used for signs, logos, cove lighting, channel letter, etc 

Art No.	Descripiton	Size (mm)	Voltage	Current (mA)	Power	LED qty	Lumen	Beaming Angle	IP Rate
5050-SMD-3R-1	Waterproof 5050 SMD 3LEDs Module Red	82.5*17*5.8	12VDC	60mA	0.72W	3	18lm	120°	IP65
5050-SMD-3Y-1	Waterproof 5050 SMD 3LEDs Module Yellow	82.5*17*5.8	12VDC	60mA	0.72W	3	20lm	120°	IP65
5050-SMD-3B-1	Waterproof 5050 SMD 3LEDs Module Blue	82.5*17*5.8	12VDC	60mA	0.72W	3	15lm	120°	IP65
5050-SMD-3G-1	Waterproof 5050 SMD 3LEDs Module Green	82.5*17*5.8	12VDC	60mA	0.72W	3	30lm	120°	IP65
5050-SMD-3W-1	Waterproof 5050 SMD 3LEDs Module White	82.5*17*5.8	12VDC	60mA	0.72W	3	40lm	120°	IP65
5050-SMD-3WW-1	Waterproof 5050 SMD 3LEDs Module Warm white	82.5*17*5.8	12VDC	60mA	0.72W	3	30lm	120°	IP65

Specification

82.5*17*5.8

IP Class: IP65

Beaming Angle: 120

Weight: 10g

Electrical specification

Input Voltage: 12VDC

Power Consumption: 0.72W

 Attention:  

* To ensure the longevity and stability of Module, please do not hit or beat the module forcibly.

* Please do not install it in totally exposed outdoor environment.

* We advise that the distance between the nodule and light bos cover within 80~150mm, The distance between each module is 40~60mm. 

Warning:

* Do not touch INPUT PORT when power is on.

* Please leave 20%power free to protect the brightness of module from being influenced by environments.

* Install this module at desired installation spot.

* Please note the negavive and positive polarity when you link wires of power supply to avoid short circuit.

* Make sure the output voltage of power supply is of the same with module’s operating voltage.