Waterproof 3528 SMD 3LEDs Module adpots 3pcs of SMD LED as its luminous body, this product has good ability, wide beaming angle, and perfect design. ABS Engineering Plastic Housing glued with epoxy makes the product wholly waterproof.
Easy installation can be realized with two mounting holes and 3M tape on the back. This product can be widely used for signs, logos, cove lighting, channel letter, etc.
1. Adopt 3pcs super bright SMD LEDs with high brightness and light efficiency.
2. Professionally designed to be IP 65 protection rate.
3. Easy installation with two mounting holes and 3M adhesive tape on the back.
4. Available Color: Red, Yellow, Blue, Green, White
5. Application: Backlight of signage, channel letter, signs, light box etc.
6. Package Info: Ctn size: 58*27*36cm,1000pcs/ctn, Gross Weight: 11KG/ctn.Volumetric Weight: 13KG/ctn.
7. Attention: Please do not install it in totally exposed outdoor environment.
8. Warranty: 18 months.
Art No. | Descripiton | Size
(mm) | Voltage | Current
(mA) | Power | LED qty | Lumen | Beaming Angle | IP Rate | |
| |
3528-SMD-3R-1 | Waterproof 3528 SMD 3LEDs Module Red | 70.6*15*5.5 | 12VDC | 20mA | 0.24W | 3 | 3.9lm | 120° | IP65 | |
3528-SMD-3Y-1 | Waterproof 3528 SMD 3LEDs Module Yellow | 70.6*15*5.5 | 12VDC | 20mA | 0.24W | 3 | 6lm | 120° | IP65 | |
3528-SMD-3B-1 | Waterproof 3528 SMD 3LEDs Module Blue | 70.6*15*5.5 | 12VDC | 20mA | 0.24W | 3 | 3lm | 120° | IP65 | |
3528-SMD-3G-1 | Waterproof SMD 3LEDs Module Green | 70.6*15*5.5 | 12VDC | 20mA | 0.24W | 3 | 9lm | 120° | IP65 | |
3528-SMD-3W-1 | Waterproof 3528 SMD 3LEDs Module White | 70.6*15*5.5 | 12VDC | 30mA | 0.36W | 3 | 19.5lm | 120° | IP65 | |
3528-SMD-3WW-1 | Waterproof 3528 SMD 3LEDs Module Warm white | 70.6*15*5.5 | 12VDC | 20mA | 0.24W | 3 | 15lm | 120° | IP65 | |
Specification:
Size: 70.6*15*5.5mm
Beaming Angle: >120degree
IP Class:IP65
Weight: 8g
Electrical specification:
Input Voltage: 12V DC
Attention:
* To ensure the longevity and stability of Module, please do not hit or beat the module forcibly.
* Please do not install it in totally exposed outdoor environment.
* We advise that the distance between the nodule and light bos cover within 80~150mm, The distance between each module is 40~60mm.
Warning:
* Do not touch INPUT PORT when power is on.
* Please leave 20%power free to protect the brightness of module from being influenced by environments.
* Install this module at desired installation spot.
* Please note the negavive and positive polarity when you link wires of power supply to avoid short circuit.
* Make sure the output voltage of power supply is of the same with module’s operating voltage.
