Feature:
LED Tri-chip Crystal Ribbon adopts tri-chip LED as its luminous body. The chips of the LED, which is from famous international company is of very high intensity, good quality and stability.
Five LEDs (24V) make one group and each group can be cut according to the length requirement. Ribbons could be connected via mini waterproof connectors.
Special waterproof craft not only makes the product wholly waterproof but also keeps the ribbon flexible and easy-curved. It is really an ideal lighting product for both indoor and outdoor, such as edge decoration, stair decoration, car decoration, small floodlight, etc.
1’. Super flexible PCB board as base and tri-chip LED as its luminous body.
2’. The ribbon is flexible and easy-curved. Its stability, reliability and safety is enhanced greatly.
3’. five LEDs (24VDC) can be cut according to the length requirement.
4’. Available color: White, Warm White, etc.
5’. LED spacing: 20mm(24VDC)
6’. Working temperature: -20 degree ~ +40 degree.
7’. It is really an ideal lighting decoration product for both indoor and outdoor, such as edge decoration, stair decoration, car decoration, small floodlight, etc.
8’. Package Info: 5m/reel. Ctn size: 47*33.5*26cm, 20 reels/ctn, Gross Weight: 10kg/ctn.
9’. Warranty: 18 months.
|
Part No
|
Description
|
Current
(mA/reel)
|
Consu
-mption
(W/reel)
|
Qty
Of
LED
|
Lumen
/LED
|
Viewing Angle
|
Product
Size
|
|
R50W-5050-W
-3chips-5M-1
|
5050 Waterproof LED Tri-chip Crystal Ribbon, White,
30-LEDs/meter, 5meter/reel
Input 24V DC
|
50mA*50
|
60W
|
5*50
|
17lm
|
140°
|
12*5000
mm
|
|
R50WW-5050-W
-3chips-5M-1
|
5050 Waterproof LED Tri-chip Crystal Ribbon, Warm White,
30-LEDs/meter, 5meter/reel
Input 24V DC
|
50mA*50
|
60W
|
5*50
|
13lm
|
140°
|
12*5000
mm
|
Specification:
Size: 5000*11.7mm
Led Spacing: 20mm (24V)
IP Class: 20
Beaming Angle: >140degree
Electric Specs:
Input voltage: 24VDC
Power consumption: 60W
Maximum Length of One Loop: 10meter/24VDC
Power supply:
Any high quality constant voltage power supply
Package: 5 meter/reel
Attention:
To ensure the longevity and stability of LED 3 IN 1 horizontal Ribbon, please do not hit it beat it forcibly.
Warning:
* Do not touch Input port when power is on.
* Please leave 20% power free ro protect the brightness of ribbon from being nfluenced by environments.
* Install this ribbon at desired installation spot.
* Please note the negative and positive polarity when you link wires of power supply to avoid short circult.
* Make sure the potput voltage of power supply of the same with horizontal Ribbon operating voltage
